skip to main text

Copying Photos

You can scan printed photos and print them all at one time.

  1. Make sure printer is turned on.

  2. Load photo paper.

  3. Select Copy on the HOME screen.

  4. Select Photo copy.

  5. Check on-screen instructions and select OK.

  6. Load printed photo on platen glass following on-screen instructions and select OK.

    Note

    When scanning is complete, the print settings confirmation screen is displayed.

  7. Specify settings as necessary.

    figure: Touch screen

    Flick to display setting items and select the setting item to display the settings. Select to specify the setting.

    Note

    • Depending on the setting item, some settings cannot be specified in combination with the setting of other setting items. If the setting cannot be specified in combination is selected, and Error details are displayed on the touch screen. In this case, select on the upper left on the touch screen to check the message and change the setting.

    • By selecting Preview, you can preview an image of the printout on the preview screen. Flick the photo to change the display.

      If appears on the photo, the printed photo may not be scanned properly. Rescan the printed photo.

    Following setting items can be changed.

    • Copies

      Specify the number of copies.

    • Page size

      Select the page size of the loaded paper.

    • Type (Media type)

      Select the media type of the loaded paper.

    • Paper src

      The paper source is set to Rear tray.

    • Print qlty (Print quality)

      Select print quality according to the original.

    • Border (Bordered/Borderless print)

      Select bordered or borderless print.

    • Photo fix

      Select No correction, Auto photo fix, or Fade restoration.

      Note

      • When No correction is selected, the printer prints the scanned image without correction.

      • When Auto photo fix is selected, the printer corrects the scanned image automatically.

      • When Fade restoration is selected, the printer corrects the scanned image that have faded over time.

  8. Press Color button for color printing, or Black button for black & white printing.

    The printer starts printing.

    Note

    • If the printed photo was not scanned properly, the confirmation screen asking you if you continue printing is displayed. By selecting Yes, the printer starts printing. If you rescan the photo, select No and scan the photo again.